Cubicle Fittings Shop

Designed to complement the Challenger Range of hardware, the Challenger Hinge offers additional support by wrapping around the edge of the door. This helps to prevent the door from "bursting" under heavy impact.

The Challenger hinge is more suited to aggressive environments; the twin bolt through fascia fixing ensures doors cannot be kicked off the hinges.

The door is fixed to the hinge by a flush fitting through bolt which clamps the door tightly into a channel bracket. The fascia requires two holes per hinge to accommodate the nickel plated brass "T" nuts. All drilling can be done on site.

Suitable for 12-13mm panels

The hinge incorporates a pair of adjustable nylon cams which can be set to allow the door to fall fully open, fully closed or two positions in-between.

A hidden screw is fitted to each hinge to prevent the doors from being lifted off, where immediate access is required these screws may be discarded so the door can be easily lifted off.

Supplied in a silver anodised finish, the hinges are packed and priced in pairs (i.e. one pair per standard size door 700 x 1800 x 17mm). Where heavy or outward opening doors are fitted, we would advise the fitting of three or more hinges to the door.